TIME TO PLAN RENOVATIONS
Sward will be in need of some TLC
by TurfPro Editor, Laurence Gale MSC, MBPR
 
Laurence Gale MSC, MBPR

Within the amateur and professional sports turf sector, many cricket, bowls and tennis clubs should be gearing up and planning their autumn renovations.

 

It goes without saying natural grass surfaces need specific management treatments throughout the year to keep them healthy and fit for purpose. However, come the end of the growing season, the condition of any grass sward will be in need of some TLC renovation work that generally means the removal of thatch and dead fibre, relieve any compaction, restore surface levels and reseeds with some new grasses.

 


During the growing season grass growth is adversely affected by nature's wrath in the form of various biotic and abiotic stress factors. Water deficit is one of the major abiotic stresses, which adversely affects crop growth and yield. The recent period of hot sunny weather will have certainly had a detrimental effect on many sports pitches and lawns.


Without water, they soon turn brown and in extreme cases can die. However, our UK climate tends to prevent this happening due to the fact we are a small land mass surrounded by water. It is often inevitable that we soon see a change in the weather and receive a downpour to revitalise our lawns and sports pitches. The recent heavy downpours did just that. Within days the grass was back in colour and growing vigorously.


However, with little over seven weeks to the end of October, it is imperative we move quickly and get the renovations organised, sourcing the relevant materials and machinery to undertake a decent end of season lawn renovation.


The following activities are generally implemented during an autumn renovation programme and usually carried out in the following order:-

  1. Mowing the sward, preparing surfaces for renovation.
  2. Weed & Moss treatment.
  3. Scarification, removal of unwanted debris.
  4. Aeration, decompaction of soil, improving air and gas exchange in soil.
  5. Top dressing, restores levels and improves surface drainage.
  6. Overseeding, restores grass populations.
  7. Fertilising, provides nutrients for grass growth.
  8. Brushing to incorporate dressings and to help the grass stand back up.
  9. Watering / Irrigation.

Weed control may be dealt with prior to the renovation. Any accumulated moss growth should be dealt with by applying an approved moss killing chemical, wait for it to die, then remove by scarification.


A lawn may decline through a number of reasons - lack of cultural practices, drought, weeds, diseases, shade, poor soil, neglect, abuse and overuse. The intensity of the renovation work will be driven by the condition of the playing surface and what if any underlying issues you may have. Only last week I was called out to a bowling club who were having some surface issues. Areas of the turf had become hydrophobic resulting in dead areas of turf being seen in several areas of the green.

 

 

After taking some core samples and having a closer inspection of the turf, these areas had pretty much dried out, leaving a crust of dead fibre / thatch material that prevented any grass growth. This problem is common on many greens especially if there has not been a thorough renovation carried out to remove this dead surface material.


Sometimes we must be cruel to be kind and undertake a very robust renovation programme to effectively repair and restore the playing surface.


It may be that you need to shorten your playing season to accommodate this work to give you the window of opportunity - that is to say, to give you enough time to ensure the grass can germinate and establish before the colder weather sets in mid to late October.


Scarification


Above ground (thatch layer): dead and decaying leaf and root material develops and accumulates to form a thatch layer of matted material. This layer of thatch can create a microclimate that is detrimental to turf, preventing water infiltration and providing ideal conditions for fungal and disease establishment.


Below ground (mat layer): root growth involves increased biomass of the root system and, like the grass shoots above the ground, some of this new matter dies back leaving a dead mass of root material which can often prevent and restrict new root growth and affect gaseous exchange in the soil. It is important to remove this debris.

 

 

Scarifying is the term used to remove this unwanted vegetation. There are many different ways and methods of scarifying lawns and turf surfaces. The process usually involves a raking / cutting action to clean out the thatch debris and can be done manually using spring tine rakes or mechanically using specially designed rotorakes, verticutters and knife action machines.


There are many different types of machines designed and available for scarifying turf, all offering different cutting depths, with different power and speed variations, with and without collection boxes. Machines can come in many shapes and sizes, some are pedestrian, some tractor/ prime mover mounted.


The depth of penetration for effective scarifying must be through the mat layer and into the soil. For an effective, vigorous scarifying, the blade should be at least 3 mm wide. Scarifying in two directions, at an angle of less than 90 degrees, gives the most vigorous working. Scarifying at right angles has the tendency to cause severe damage, with the small squares of turf being ripped from the surface. To restore the playing surface after vigorous scarifying will require an application of top dressing materials to restore levels and provide a seed bed for grass seed.


Aeration


Aeration is an important part of the renovation programme. Not only does aeration remedy any compaction problems by restoring and improving air movement in the soil profile, it also provides channels and openings for the top dressing materials to integrate, particularly if hollow coring or hollow tines have been used.

 

 

Depth of tines can vary between 100-200mm depending on the type of aerator being used.


Top Dressing


The application of a good quality top dressing, in combination with a suitable aeration programmes, will go a long way to counter the ravages of wear / play.


Benefits of top dressing:-

  • Restores surface levels.
  • Stimulates new root and shoot growth.
  • To cover seed (soil seed contact to initiate germination).
  • Increases water holding capacity of the soil.
  • Improves soil structure.
  • Increases nutrient retention.
  • Improves surface drainage.

There is a wide range of materials available for top dressing, ranging from straight sands, clays, loams and local soils materials through to purpose mixed rootzones combining clays, loams and sands. These mixes can be tailored to suit the customers needs, and can range from 80/20, 70/30 and 60/40 sand/soil percentage mixes.


The success of top dressing will also be influenced by the amount applied and how well it has been worked into the turf surface. Applying too much dressing will have a detrimental affect, smothering out the turf and increasing the likelihood of disease, slow grass growth and, in some cases, will kill the turf.

 

 

Overseeding


To re-establish grass cover, it is necessary to overseed the area with new grass seed. It is important to choose appropriate seed. It is not cost effective to use cheap or old grass seed stock, as germination and establishment is likely to be poor. Buy your seed from a reputable company which specialises in developing and marketing quality grass seed mixtures. These seed varieties may be more expensive, but they do guarantee quality and performance.

 

Most seed suppliers will recommend sowing rates but, as a rule of thumb, it will generally be about 35grams of seed per sq/m. Temperatures above 12°C, a moist, well-aerated seedbed, close seed/soil contact are primary requirements for rapid grass seed development.


Fertilising


Prior to applying any fertilisers, it is essential to obtain the nutrient and pH status of the soil. This can be achieved by sending soil samples to a soil laboratory which will carry out a nutrient analysis of the sample. Once obtained you will be able to choose a product that offers you the correct N P K fertiliser ratio for your soil.


These fertilisers can be supplied in granular or liquid form. Granular products tend to be more widely used because they are easier to handle and distribute. Over dosing or applying granular fertilisers without enough soil moisture being present may result in the grass becoming scorched, resulting in scarring or death of the grass plant. Fertiliser application is only effective if you ensure uniform coverage. Granular fertilisers can be applied with either a drop (gravity) spreader or a rotary (centrifugal) spreader.


Brushing / Dragmatting / Luting


Once all top dressings, grass seed and fertiliser materials have been incorporated into/onto the surface, it is important to work the material into the profile by brushing, dragmatting or luting. These operations ensure the materials are worked in evenly, and prevent any excess material remaining on the top. This operation is best done when the surface is dry, enabling the material to distribute itself easily. Irrigation / watering:


To renovate successfully, adequate water must be available from seeding through to completion of germination. Try not to allow newly overseeded areas to dry out once watering has commenced. Initially, maintain a constantly moist seedbed with frequent waterings of short duration. As newly germinated seedlings begin growth, decrease the frequency, and increase the duration of watering to encourage deeper rooting.


Conclusion


Renovations is often a time consuming and expensive exercise. Successful renovation requires detailed planning and programming, to ensure the right materials and equipment are available and working throughout the renovation process.

LikeLike (2)
In this issue
EDITOR'S BLOG
TIME TO PLAN RENOVATIONS
NEWS
GMA SHARES TOP TIPS
GENERAC INTERESTED IN BUYING CERTAIN B&S ASSETS
FAIRWAYS WEARHOUSE LAUNCHES ONLINE
PITMEDDEN BOWLS CLUB BACK ON TRACK
FIRST CLASS AT OXFORD UNIVERSITY
CUB CADET APPOINT NEW DEALER
35,000 HOURS AND COUNTING FOR BOB
JOBS
ADVERTISE YOUR JOBS HERE
PREVIOUS FEATURES
EDITOR'S BLOG ARCHIVE
TURFPRO FEATURE ARCHIVE
PARTNERS
CAMPEY
Garden trader
PRODUCED BY THE AD PLAIN